hpwater 8 inch spiral UF membranes
HPWATER’s 8 inch spiral ultra filtration membranes are designed for use with either Anodic or Cathodic Electrocoat paint.The 8” element is AMFOR’s element of choice for large industrial and automotive E-Coat systems. The following is a crossreference of 8” HPWATER products.
Dimensions
Model |
Dimensions—inch(mm) |
||
A |
B |
C |
|
EDUF-7640HE |
40(1016) |
7.5(190) |
1.125(29) |
EDUF-7640HF |
39.3(998) |
7.5(190) |
1.125(29) |
EDUF-7647.5-HE |
47.5(1206) |
7.5(190) |
1.125(29) |
EDUF-8040HE |
40(1016) |
7.9(200) |
1.125(29) |
EDUF-8040HP |
39.5(1003) |
8.63(2192) |
1.125(29) |
Specifications capacities
MODEL |
PAINT /CAPACITY |
ACTIVE AREA- ft2(m2) |
HOUSING |
EDUF-7640HE |
ANODIC 4.0GPM CATHODIC 2.5GP
|
300(28.0) |
Synder V62-7640H |
EDUF-7640HF |
265(24.6) |
Koch S8-HFM-183-LPF Koch S8-HFM-300-LPF |
|
EDUF-7647.5-HE |
265(24.6) |
Synder V62-7647.5H |
|
EDUF-8040HE |
350(32.5) |
Osmonics 815EDI Koch 8040M-183-LPHN |
|
EDUF-8040HP
|
290(26.9)
|
Koch S8-HFM-183-LPP Koch S8-HFM-300-LPP |
Based on field experience with black, leaded 18% solids paint.
Paint type and tank conditions will determine actual membrane performance
Design parameters
Design Parameters |
Element Limits |
min |
max |
|
Feed Rate (HS elements) |
120GPM |
PH Range: |
1 |
11 |
Feed Rate (HE elements) |
60GPM |
Feed Rate,GPM(HE) |
48 |
72 |
Element Inlet Pressure |
50PSI |
Feed Rate,GPM(HS) |
96 |
144 |
Pressure Drop |
25PSI
|
Inlet Pressure, PSI Operating Temperature,℉ |
30 60 |
60 120 |
Note: Operating parameters other than those specified will affect membrane performance, cleanability and membrane life.